John Deere 5105ML, 5120ML and 5130ML Cab Tractors Diagnostic Technical Manual (TM611819)

Illustrated factory Diagnostic Technical Manual for John Deere Cab Tractors Models 5105ML, 5120ML and 5130ML.

This manual will assist you in diagnosing for your cab tractor.
You can use a Windows, Mac, or Android device to view this manual. You only need to have a PDF reader installed.

Covered Models:
   5105ML
   5120ML
   5130ML

Format: PDF, 1953 pages
Language: English
Publication Date: 16 Dec 2024
Table of Contents:
   Introduction
      Foreword
   General Information
      Safety
      General References
      How to Use This Manual
      Machine and Technical References
   Diagnostic Trouble Codes
      ABV DTCs
      AIC DTCs
      CCU DTCs
      CLC DTCs
      CSA DTCs
      CSM DTCs
      ECU DTCs
      EIC DTCs
      FCC DTCs
      GM2 DTCs
      HCC DTCs
      HV1 DTCs
      JDL DTCs
      MFC DTCs
      OIC DTCs
      PDU DTCs
      PTF DTCs
      PTU DTCs
      RPT DTCs
      SCC DTCs
      SMB DTCs
      TEC DTCs
      TIU DTCs
      TMK DTCs
      TML DTCs
      TMM DTCs
      VLC DTCs
      VTV DTCs
      XMC DTCs
      XSC DTCs
   Observable Symptoms and System Diagnostics
      General References
      Engine Diagnostics
      Fuel, Air, and Cooling Diagnostics
      Electrical Diagnostics
      Electronic Control Unit Diagnostics
      Transmission Diagnostics
      Drive Systems Diagnostics
      Brakes Diagnostics
      Steering Diagnostics
      Hydraulic Diagnostics - Closed Center System
      Operator Station Diagnostics
   Engine
      General References
      Calibrations, Preliminary and Operational Checks
      Theory of Operation
      Schematics
      Components and Connectors
      Tests and Adjustments
   Fuel, Air, and Cooling
      General References
      Calibrations, Preliminary and Operational Checks
      Theory of Operation
      Schematics
      Components and Connectors
      Tests and Adjustments
   Electrical General and Theory of Operation
      General References
      Engine Auxiliaries
      Starting, Neutral Start, Charging, and Battery Disconnect
      Power Outlets, Implement Connectors, and ISOBus
      Lighting and Brakes
      Tractor and Implement CAN Bus
      Primary Display
      Control Unit Power and Ground
      Transmission
      Drive Systems
      AutoTrac Steering
      Hydraulics
      Operator Station, Wipers, and Alarms
   Electrical Schematics
      General References
      Starting, Charging, Power Outlets, and Grounds
      Grounding
      Implement Connectors
      Cab Control Unit
      Rear 2 Control Unit
      Backup Alarm and Fuel Heater
      Primary Display
      Engine Control Unit 4.5L
      CAN and Service Advisor
      JDLink
      Heating, Ventilation, and Air Conditioning
      HVAC CAT IV (Field Kit)
      Front PTO
      Front Wiper and Washer
      Rear Wiper and Washer
      Radio and Courtesy Lights
      Seat
      AutoTrac Integrated
      AutoTrac Basic
      ISOBUS, Starfire, and GreenStar
      Tractor Equipment Communication Control Unit
      CAN-to-Bluetooth Control Unit
   Electrical Components and Connectors
      General References
      Assemblies, Modules, and Control Units
      Sensors
      Worklights and Various Devices
      Fuses and Protection Devices
      Batteries and Charging
      Warning Lights, Alarms, and Signaling Devices
      Relays
      Motors
      Resistors
      Switches
      Diodes
      Harnesses
      Connectors
      Grounds
      Interconnects
      Solenoids and Electrically Actuated Mechanical Devices
   Electrical Tests and Adjustments
      General References
      Tests and Adjustments
   Electronic Control Units
      General References
      Calibrations, Preliminary and Operational Checks
      Theory of Operation
      Schematics
      Components and Connectors
      Tests and Adjustments
      AutoTrac Basic Vehicle Navigation (ABV)
      Armrest Interface Control (AIC)
      Chassis Control Unit (CCU)
      Cab Load Center (CLC)
      Reassignable Selective Control Valve (CSA)
      Cab Switch Module (CSM)
      Engine Control (ECU) 4.5L
      Engine Interface Control (EIC)
      Front Console Control (FCC)
      Management Computer (GM2)
      Hitch Control Unit (HCC)
      Hitch Valve Control (HV1)
      JDLink (JDL)
      Multi-Function Control (MFC)
      Operator Interface Control (OIC)
      Primary Display Unit (PDU)
      Front PTO Control (PTF)
      Power Train Utility (PTU)
      Rear PTO Control (RPT)
      Selective Control Valve (SCC)
      Sequence Control (SMB)
      Tractor Equipment Control (TEC)
      Tractor Equipment Control (TEI)
      Transmission Shift Control (TIU)
      Mid-Mount EH SCV XI Control (TMK)
      Mid-Mount EH SCV XII Control (TML)
      Mid-Mount EH SCV XIII Control (TMM)
      Vehicle Load Center (VLC)
      Virtual Terminal Vehicle (VTV)
      AutoTrac Main Control (XMC)
      AutoTrac Supervisor Control (XSC)
   Transmission
      General References
      Calibrations, Preliminary and Operational Checks
      Transmission Identification
      Park Lock Theory of Operation
      Control Valves Theory of Operation
      Forward and Reverse Theory of Operation
      Speed and Range Theory of Operation
      Creeper Theory of Operation
      Lubrication Theory of Operation
      Schematics
      Components and Connectors
      Tests and Adjustments
   Drive Systems
      General References
      Calibrations, Preliminary and Operational Checks
      Differential Theory of Operation
      Differential Lock Theory of Operation
      Final Drive Theory of Operation
      Front PTO Theory of Operation
      Rear PTO Theory of Operation
      MFWD Theory of Operation
      Schematics
      Components and Connectors
      Tests and Adjustments
   Brakes
      General References
      Calibrations, Preliminary and Operational Checks
      Theory of Operation
      Schematics
      Components and Connectors
      Tests and Adjustments
   Steering
      General References
      Calibrations, Preliminary and Operational Checks
      Theory of Operation
      Schematics
      Components and Connectors
      Tests and Adjustments
   Hydraulics - Closed Center
      General References
      Calibrations, Preliminary and Operational Checks
      Hydraulic Pump Theory of Operation
      Priority Valve Theory of Operation
      Electro-Hydraulic Hitch Theory of Operation
      Electrohydraulic Mid-Mount SCV Theory of Operation
      Mechanical Rear SCV Theory of Operation
      Secondary Hydraulic Filter Theory of Operation
      Primary Hydraulic Oil Filter Theory of Operation
      Schematics
      Components and Connectors
      Tests and Adjustments
   Operator Station
      General References
      Calibrations, Preliminary and Operational Checks
      Heating, Ventilation, and Air Conditioning Theory of Operation
      Seat Theory of Operation
      Schematics
      Components and Connectors
      Tests and Adjustments
   Special Tools
      General References
      Dealer Fabricated Tools
      Section 240A
      Section 240B
      Section 240C
      Section 240D